← All free practice sets

NO SIGN-UP REQUIRED

Free NFPA 70E Electrical Safety Practice — 2024 edition practice questions (2026)

What is the format? These ten original multiple-choice questions introduce NFPA 70E Electrical Safety Practice — 2024 edition study topics. They are practice material, not actual exam items. Official assessments may use different formats; check the current candidate guide for your credential.

What does this prepare me for? General code practice. Not aligned to any specific state exam blueprint. Check your licensing authority’s current bulletin. CodeReady does not confer a license.

What should I study? Start with scope, definitions, and relationship to osha, electrically safe work condition and lockout/tagout, electrical safety program and risk assessment. This bank uses NFPA 70E 2024; consensus standard practice. Check the current exam objectives, adopted editions, and permitted references before planning your study.

How should I practice? Choose an answer before opening the explanation. Read the cited reference and revisit unfamiliar topics. These samples are general preparation, not jurisdiction-specific advice.

Explore full NFPA 70E Electrical Safety Practice — 2024 edition →

1 / Scope, definitions, and relationship to OSHA

Which document primarily addresses electrical safety-related work practices rather than premises wiring installation?

  1. NFPA 70E
  2. NFPA 70 alone
  3. A utility rate schedule
  4. A motor efficiency label
Show answer & explanation

NFPA 70E

NFPA 70E focuses on workplace electrical safety; the NEC primarily addresses installations.

NFPA 70E 2024 §90.2; §90.3(A); §110.4(A), Informational Note

2 / Electrically safe work condition and lockout/tagout

Why are current drawings useful before lockout/tagout?

  1. They prove every conductor is dead
  2. They replace personal protective equipment
  3. They help locate supply and isolation points
  4. They eliminate the need to inspect equipment identification
Show answer & explanation

They help locate supply and isolation points

Drawings support source identification, but field conditions and verification remain necessary.

NFPA 70E 2024 §120.5(A)(1); §120.6(1)

3 / Electrically safe work condition and lockout/tagout

A UPS output remains live after its input breaker is locked. What was missed?

  1. The need to change the breaker label color
  2. The room lighting circuit's power factor
  3. The UPS battery-backed output as an energy source
  4. The output conductor's normal operating temperature
Show answer & explanation

The UPS battery-backed output as an energy source

A UPS can sustain its output independently of the locked input supply.

NFPA 70E 2024 §120.6(1); §120.3(C)

4 / Electrical safety program and risk assessment

A crew is trained on ac equipment but assigned unfamiliar dc battery work. What should happen before assignment?

  1. Assume ac training covers every dc hazard
  2. Use ac approach distances without checking applicability
  3. Evaluate competence and provide task-specific preparation
  4. Let possession of a voltage meter establish qualification
Show answer & explanation

Evaluate competence and provide task-specific preparation

Different equipment and hazards can require additional skills and training.

NFPA 70E 2024 §110.4(A)(1), (3)(2), (3)(5)

5 / Shock risk assessment and approach boundaries

For exposed circuit parts on a 480 V ac nominal phase-to-phase system at an elevation not exceeding 3000 ft, what restricted approach boundary does Table 130.4(E)(a) specify?

  1. 1 ft 0 in.
  2. 3 ft 6 in.
  3. 6 ft 0 in.
  4. 10 ft 0 in.
Show answer & explanation

1 ft 0 in.

The 151–750 V row gives a restricted approach boundary of 1 ft, including its inadvertent-movement allowance. The larger choices are not the restricted value for this row. Footnote d calls for considering adjustment at higher elevations.

NFPA 70E 2024 Table 130.4(E)(a), 151–750 V row and footnote d

6 / Arc flash risk assessment and incident energy

What does Table 130.5(C) help evaluate?

  1. The likelihood of an arc flash incident for described tasks and conditions
  2. The minimum arc rating of every possible clothing system
  3. The impedance of each feeder conductor
  4. The number of workers required for every job
Show answer & explanation

The likelihood of an arc flash incident for described tasks and conditions

The likelihood table is not an incident-energy calculation or a universal PPE rating table.

NFPA 70E 2024 §130.5(C); Table 130.5(C), footnote b

7 / Arc flash risk assessment and incident energy

A worker's hands are closer to the arc than the torso distance used in analysis. What should PPE planning recognize?

  1. Hand and arm exposure can differ from the torso exposure
  2. The torso result proves identical exposure everywhere
  3. Voltage-insulating gloves always have unlimited arc protection
  4. Hand position is irrelevant when a face shield is worn
Show answer & explanation

Hand and arm exposure can differ from the torso exposure

The actual work posture and body-part exposure matter when selecting protection.

NFPA 70E 2024 §130.5(G); §130.7(C)(7)

8 / PPE selection, ratings, and care

Can the ratings of two clothing layers simply be added to claim a system arc rating?

  1. Yes; addition always predicts tested performance
  2. No; use an established rating for the layered system
  3. Only if the layers are the same color
  4. Only if each layer has pockets
Show answer & explanation

No; use an established rating for the layered system

Layer interactions mean individual ratings cannot be casually summed to establish ensemble performance.

NFPA 70E 2024 Table 130.5(G), footnote a; §130.7(C)(9)(a)

9 / Energized work and permits

Does a permit exemption automatically waive PPE and safe work practices?

  1. Yes; an exempt task has no electrical hazards
  2. No; the applicable safety requirements remain
  3. Yes; an exemption replaces shock assessment
  4. Only if the test lasts less than five minutes
Show answer & explanation

No; the applicable safety requirements remain

A paperwork exemption does not remove the actual exposure or required controls.

NFPA 70E 2024 §130.2(C); §130.1

10 / Maintenance and special equipment

A breaker has not been maintained as assumed in an arc flash study. What is the implication?

  1. Its clearing performance may not support the study assumptions
  2. Its arc flash label becomes more conservative automatically
  3. Its trip time is necessarily zero
  4. Only the exterior paint rating changes
Show answer & explanation

Its clearing performance may not support the study assumptions

Maintenance condition can affect protective operation and the validity of risk assumptions.

NFPA 70E 2024 §205.4–205.5; §130.5(G)

Keep the momentum.

Unlock the full bank, practice modes, and explanations.

Get the full practice bank →