← All free practice sets

NO SIGN-UP REQUIRED

Free Electrical Code Practice — NEC 2023 practice questions (2026)

What is the format? These ten original multiple-choice questions introduce Electrical Code Practice — NEC 2023 study topics. They are practice material, not actual exam items. Official assessments may use different formats; check the current candidate guide for your credential.

What does this prepare me for? General code practice. Not aligned to any specific state exam blueprint. Check your licensing authority’s current bulletin. CodeReady does not confer a license.

What should I study? Start with general requirements, wiring methods, conductors and overcurrent. This bank uses NEC 2023. Check the current exam objectives, adopted editions, and permitted references before planning your study.

How should I practice? Choose an answer before opening the explanation. Read the cited reference and revisit unfamiliar topics. These samples are general preparation, not jurisdiction-specific advice.

Explore full Electrical Code Practice — NEC 2023 →

1 / General requirements

A listed panelboard is supplied with a torque value for its terminals. Which installation practice satisfies the terminal tightening requirement?

  1. Use an approved means to achieve the indicated terminal torque
  2. Use a torque value selected only from conductor ampacity
  3. Apply the same torque used for the breaker handle
  4. Tighten until the conductor insulation deforms
Show answer & explanation

Use an approved means to achieve the indicated terminal torque

Achieve the tightening torque indicated on the equipment or in its installation instructions using an approved means. A calibrated torque tool is one such means; follow any applicable manufacturer instructions.

NEC 2023 110.14(D)

2 / Wiring methods

Several conductors of the same AC circuit pass through a steel enclosure. How should they generally be arranged?

  1. Together through the same opening
  2. Each phase through a separate isolated steel hole
  3. The equipment ground outside the raceway in all cases
  4. Only the neutral through the largest hole
Show answer & explanation

Together through the same opening

Grouping all circuit conductors prevents inductive heating in ferrous metal. Separate openings require specific permitted arrangements.

NEC 2023 300.20(A)

3 / Wiring methods

Internal cable clamps occupy a box. What is their general box-fill treatment?

  1. Two volumes for each cable entering
  2. No allowance for any internal clamp
  3. One conductor volume based on the largest conductor present
  4. One volume for every individual clamp screw
Show answer & explanation

One conductor volume based on the largest conductor present

One or more internal cable clamps together count as one conductor volume based on the largest conductor present.

NEC 2023 314.16(B)(2)

4 / Conductors and overcurrent

A neutral carries only the unbalanced current of a single-phase 3-wire circuit. How is it generally treated for conductor-count adjustment?

  1. It counts only when white
  2. It cannot be installed in the same raceway
  3. It is not required to be counted
  4. It must always be counted as two conductors
Show answer & explanation

It is not required to be counted

A neutral carrying only unbalanced current from other conductors of the same circuit need not be counted for adjustment under the stated rule.

NEC 2023 310.15(E)(1)

5 / Conductors and overcurrent

A dwelling wall space 2 feet or wider is ordinarily included in receptacle spacing requirements. Which wall segment generally qualifies?

  1. A fireplace opening
  2. A 3-foot uninterrupted wall segment
  3. A doorway opening
  4. A fixed exterior door opening itself
Show answer & explanation

A 3-foot uninterrupted wall segment

Wall spaces 2 feet or wider are included, with the specific treatment of openings, fixed panels, and similar features defined by the rule.

NEC 2023 210.52(A)(2)

6 / Grounding and bonding

A grounding electrode conductor connects only to a concrete-encased electrode. What copper size is generally not required to be exceeded?

  1. 8 AWG copper
  2. 4 AWG copper
  3. 2 AWG copper
  4. 2/0 AWG copper
Show answer & explanation

4 AWG copper

The sole connection to a concrete-encased electrode need not be larger than 4 AWG copper under the special sizing rule.

NEC 2023 250.66(B)

7 / Services

How many services are generally permitted to supply one building, unless a specific exception applies?

  1. One
  2. One per floor without restriction
  3. Unlimited if individually metered
  4. Two in every case
Show answer & explanation

One

The general rule is one service per building or structure, with enumerated exceptions for special conditions, capacity, and other circumstances.

NEC 2023 230.2

8 / Motors

For a typical single continuous-duty motor, what is the general branch-circuit conductor ampacity requirement?

  1. The locked-rotor current continuously
  2. At least 125 percent of the applicable motor full-load current
  3. Exactly the nameplate current in every case
  4. 80 percent of table full-load current
Show answer & explanation

At least 125 percent of the applicable motor full-load current

Motor branch-circuit conductors generally require 125 percent of the applicable full-load current, with table-current and special-motor provisions.

NEC 2023 430.22(A)

9 / Special occupancies

Ignitible concentrations of flammable gas or vapor can exist in a location during normal operation. Which classification generally applies under the Division system?

  1. Class II, Division 2 solely because gas is present
  2. An ordinary dry location
  3. Class III in every case
  4. Class I, Division 1 under the Division system
Show answer & explanation

Class I, Division 1 under the Division system

Class I concerns flammable gases or vapors. Division 1 includes conditions where ignitible concentrations can exist during normal operation.

NEC 2023 500.5(B)(1)

10 / Calculations

A conductor has 40 A ampacity in its permitted adjustment column. Six current-carrying conductors share the raceway and the applicable ambient factor is 0.91. What adjusted value results before terminal and other limits?

  1. 40 A
  2. 32 A
  3. 29.12 A
  4. 36.4 A
Show answer & explanation

29.12 A

Apply both factors: 40 × 0.80 × 0.91 = 29.12 A. This calculated value is not automatically the permitted breaker rating.

NEC 2023 310.15(B), (C)

Keep the momentum.

Unlock the full bank, practice modes, and explanations.

Get the full practice bank →

A SMALL HABIT. A STRONGER START.

Daily question by email

Make room for one question, one explanation, and a little more confidence.

By subscribing, you agree to receive daily study emails. Unsubscribe anytime.

Privacy · Unsubscribe